Bobcat 463 1.3 Tonne Skid Steer Loader
Bobcat 463 Specifications
The Bobcat 463 skid steer loader was manufactured between 2001 and 2008 until being subsequently replaced by the Bobcat S70. The Bobcat 463 skid steer loader was renowned for its capacity to complete chores and activities that required a small amount of area. The little loader could operate in spaces that were inaccessible to larger construction machinery. The Bobcat 463 may also take the place of labourers by excavating, grading land, and tilling soil quickly, compactly, and effectively.
Technical Specifications
A three-cylinder, 1.0-liter, 22.5 horsepower Kubota D1005-E engine powered the Bobcat 463. The 463 engine's displacement was 61.1 cubic inches, and it ran on diesel fuel. The four-wheel drive Bobcat 463 has a hydrostatic transmission. The arms and bucket may be lowered and raised using the hydraulics of the Bobcat 463. The steering and speed of the Bobcat 463 were controlled by two hand levers.
The Bobcat 463 featured a 1,405-pound tipping capacity, a 700-pound rated working capacity, and a 2,708-pound operating weight. The Bobcat 463 has 5.7-inch by 12-inch standard tyres and a top speed of 6.5 mph. Additionally, the Bobcat possessed a 10-gallon-per-minute hydraulic pump that could move a number of attachments, such as a utility grapple, a snow blower, and buckets.
The Bobcat 463 was 100.8 inches long with the bucket attachment attached and 75.5 inches long without it. Without a bucket attachment, the Bobcat 463 had a width of 35.4 inches, while with one, it measured 36 inches. The Bobcat was 71.4 inches tall, and the distance from the bucket hinge pin to the ground was 94.5 inches. The wheelbase of the Bobcat was 28.4 inches, and its turning radius was 61.3 inches.
The Bobcat has a number of features, such as lift arm support, front and rear lights, an operator cab, and front auxiliary hydraulics. Additionally, it offered options for a top window, cab heater, key-less start kit, revolving beacon, suspension seat, and a reverse alarm. The 463's attachments included a backhoe, bucket, pallet fork, snow blower, trencher, angle broom, breaker, utility fork, and fork.
Adapt Digger Hire Hertfordshire Copyright© 2022 All Rights Reserved